tel:+86-25-84681741(808) fax:(025)84645860 basket chinese Download
home about us products news Download feedback contact us  
·Motors' Controllers and Drivers
·DC MOTORS
·AC MOTORS-SINGLE PHASE
·AC MOTORS-THREE PHASE
·SERVO MOTORS/DRIVERS
·STEPPING MOTORS/DRIVERS
·LINEAR ACTUATOR/MOTORS
·FANS AND BLOWERS
·PUMPS
·GEAR MOTORS
·CNC CONTROL
·WIND TURBINE
your position:home >> DC MOTORS >> PM DC MOTORS

FT-60DM
Specification                 
Model No. Voltage No load  Rated Rated Rated Stall    Rated Motor
speed   Torque   speed Current torque    Power Length L
  V  rpm mNm rpm A mNm   W mm
60DMDZ01 24 1200 40 890 0.43 150   10 75
60DMDZ02 24 2000 35 1500 0.8 190   20 75
60DMDZ03 24 3000 40 2500 1.1 260   27 75
60DMDZ04 24 2000 125 1550 1.6 550   40 105
60DMDZ05 24 3000 120 2500 2.2 720   54 105
Dimensions

Technique parameter           
Item Specification
Insulation class
Class B 130℃
Insulation resistance
100MΩminimum under normal temperature and humidity, when measured by a 500VDC megger between the motor coils and casing
Insulation voltage Sufficient to withstand 1.0kv,60Hz applied between the motor coils and casing for 1 minute, under normal temperature and humidity
Ambient temperature
- 10°C ~ + 50°C
Ambient Humidity
85% or less
 
Gas medium No corrosive gas and dust ,can not directly contact water and oils(expect special airproof motor)
Temperature rise Resistance Method is 80 oC or less (at standstill, two phase energized)
Shaft Runout
0.05mm(T.I.R) at top of output shaft
Axial Play
0.025mm Max.Of 1.12 1b.(5N)
Redial Play
0.075mm Max.Of 2.2 1b.(10N)

Address: china jiangsu nanjing  Contact: Mr. Sun Tel :86-25-84681741(808) Fax :86-25-84645860  E-mail: sales@fastechcn.com

 Copyright © 2007-2009 Nanjing Fastech Electrical Co., Ltd.Su ICP Number08019064 Design: HuaLay.Net