tel:+86-25-84681741(808) fax:(025)84645860 basket chinese Download
home about us products news Download feedback contact us  
·Motors' Controllers and Drivers
·DC MOTORS
·AC MOTORS-SINGLE PHASE
·AC MOTORS-THREE PHASE
·SERVO MOTORS/DRIVERS
·STEPPING MOTORS/DRIVERS
·LINEAR ACTUATOR/MOTORS
·FANS AND BLOWERS
·PUMPS
·GEAR MOTORS
·CNC CONTROL
·WIND TURBINE
your position:home >> DC MOTORS >> PM DC MOTORS

FT-45DM
Specification                 
Model No. Voltage No load  Rated Rated Rated Stall    Rated Motor
speed   Torque   speed Current torque    Power Length L
  V  rpm mNm rpm A mNm   W mm
45DMHH01 24 4300 49 3700 1.5 150   36 67
45DMHH02 24 4300 49 3700 1.5 150   36 67
45DMHH03 24 3600 58 3200 1.5 180   36 67
45DMHH04 24 3600 58 3200 1.5 180   36 67
45DMHH05 24 3600 58 3200 1.5 180   36 67
45DMHH06 24 3600 98 3000 1.8 190   45 79
45DMHH07 24 2200 98 1700 1.4 240   40 79
45DMHH08 28 3200 78 2800 1.4 220   40 74
45DMHH09 28 3000 98 2500 1.6 240   45 79

Dimensions

Technique parameter           
Item Specification
Insulation class
Class B 130℃
Insulation resistance
100MΩminimum under normal temperature and humidity, when measured by a 500VDC megger between the motor coils and casing
Insulation voltage Sufficient to withstand 1.0kv,60Hz applied between the motor coils and casing for 1 minute, under normal temperature and humidity
Ambient temperature
- 10°C ~ + 50°C
Ambient Humidity
85% or less
 
Gas medium No corrosive gas and dust ,can not directly contact water and oils(expect special airproof motor)
Temperature rise Resistance Method is 80 oC or less (at standstill, two phase energized)
Shaft Runout
0.05mm(T.I.R) at top of output shaft
Axial Play
0.025mm Max.Of 1.12 1b.(5N)
Redial Play
0.075mm Max.Of 2.2 1b.(10N)

Address: china jiangsu nanjing  Contact: Mr. Sun Tel :86-25-84681741(808) Fax :86-25-84645860  E-mail: sales@fastechcn.com

 Copyright © 2007-2009 Nanjing Fastech Electrical Co., Ltd.Su ICP Number08019064 Design: HuaLay.Net