tel:+86-25-84681741(808) fax:(025)84645860 basket chinese Download
home about us products news Download feedback contact us  
·Motors' Controllers and Drivers
·DC MOTORS
·AC MOTORS-SINGLE PHASE
·AC MOTORS-THREE PHASE
·SERVO MOTORS/DRIVERS
·STEPPING MOTORS/DRIVERS
·LINEAR ACTUATOR/MOTORS
·FANS AND BLOWERS
·PUMPS
·GEAR MOTORS
·CNC CONTROL
·WIND TURBINE
your position:home >> DC MOTORS >> PM DC MOTORS

FT-42DM
Specification                 
Model No. Voltage No load  Rated Rated Rated Stall    Rated Motor
speed   Torque   speed Current torque    Power Length L
  V  rpm mNm rpm A mNm   W mm
42DMDS01 24 4000 30 3480 0.64 220   15 80
42DMDS02 24 4000 50 3350 1.10 300   25 90
42DMDS03 24 4000 70 3350 1.40 400   28 100
Dimensions

Technique parameter           
Item Specification
Insulation class
Class B 130℃
Insulation resistance
100MΩminimum under normal temperature and humidity, when measured by a 500VDC megger between the motor coils and casing
Insulation voltage Sufficient to withstand 1.0kv,60Hz applied between the motor coils and casing for 1 minute, under normal temperature and humidity
Ambient temperature
- 10°C ~ + 50°C
Ambient Humidity
85% or less
 
Gas medium No corrosive gas and dust ,can not directly contact water and oils(expect special airproof motor)
Temperature rise Resistance Method is 80 oC or less (at standstill, two phase energized)
Shaft Runout
0.05mm(T.I.R) at top of output shaft
Axial Play
0.025mm Max.Of 1.12 1b.(5N)
Redial Play
0.075mm Max.Of 2.2 1b.(10N)

Address: china jiangsu nanjing  Contact: Mr. Sun Tel :86-25-84681741(808) Fax :86-25-84645860  E-mail: sales@fastechcn.com

 Copyright © 2007-2009 Nanjing Fastech Electrical Co., Ltd.Su ICP Number08019064 Design: HuaLay.Net